
$25.00
Item qualifies for annual
REI Member Refund (typically 10%)
Made in USA.
Item 663796
Specification | Description |
| Weight | 171 grams |
Reviewed by 4 customers
Sort by
Displaying reviews 1-4
Pros
Cons
Best Uses
Comments about Park Chainmate Chain Scrubber:
I'm very happy I bought this. It cleans chains very well. The manufacturer says to run four cycles per cleaning, but I find that 1 or 2 is fine. You can also use dishwashing detergent mixed with water if you run out of ChainBrite and need to clean your chain in a pinch.
The only drawback is that it sprays a little bit of ChainBrite as you pedal the chain through the cleaner. This doesn't bother me--when I'm working in the garage I expect to get dirty--but you should be aware of this so that you be sure to put down plenty of newspaper or other disposable surface type.
Pros
Cons
Best Uses
Comments about Park Chainmate Chain Scrubber:
So I hooked this tool up to my sadly abused, foul-weather, ride-through-anything mountain bike. I expected it to take about 5 cycles to get all the garbage off my chain. WRONG! In ten minutes I had the chain gleaming. I couldn't believe the job it did and with no horrible mess either. Definitely recommend it.
Pros
Cons
Best Uses
Comments about Park Chainmate Chain Scrubber:
This tool I use after every ride in the dirty,dusty single track trails of the Wissahickon park in Philadelphia, PA. I mostly will put some 2 parts Simple Green cleaner and 1 part water in the unit to clean the chain clear of dirt and mud and dust. It actually works well and the magnet does pick up a significant amount of metal shavings from the chain. THis is visible and really makes you feel like the cleaning was worthwhile. When this one eventually breaks, I will definitly get a replacement one of the same brand/model.
Pros
Cons
Best Uses
Comments about Park Chainmate Chain Scrubber:
I have used this tool for the first time and wish I had gotten it sooner. Where I live in south Jersey a lot of the trails are riddled with sand. This thing gets all of the muck out of the rollers and chain joints. I used to remove the rear wheel and spray WD 40 then use compressed air to blow out debris which is a lot more labor intensive and does not do as good of a job.
Displaying reviews 1-4
How are we doing? Give us feedback on this page.
Shopping Cart
Find REI on:
Facebook
Twitter
YouTube
MySpace
Flickr