How to Choose Running Shoes

Bio

There are lots of running-shoe brands and styles on the market. While most running shoes feel comfortable when you're standing on the carpet in a sports store, the true test is after several miles on the trail or asphalt. You'll quickly realize that your perfect shoe has more to do with the shape of your foot and your running style than it does with the logo stitched on the side.

Road Runners or Trail Runners?

Road running shoes are designed for pavement and occasional forays onto packed surfaces with slight irregularities (fire roads, nature trails, wood-chip paths). Light and flexible, they're made to cushion or stabilize feet during repetitive strides on hard, even surfaces.

Trail running shoes are essentially beefed-up running shoes designed for off-road routes. They are enhanced with aggressive outsoles for solid traction and fortified to offer stability, support and underfoot protection. If you routinely encounter roots, rocks, mud, critter holes or other obstacles during runs, choose trail runners.

Tip: If you can't find a trail shoe with the right fit for your running mechanics, it's better to go with a road-running shoe.

Shop REI's selection of running shoes.

Know Your Feet

Foot size: You probably know your shoe size already. But if you're unsure or if one foot is larger than the other, it's best to have your feet measured at REI or other shoe retailer with a Brannock device. (That's the flat metal tool with sliders that measure the length, width and the toe-to-ball length of the foot.).Whenever possible, try the shoe on to see if it fits. Shoe lasts (which determines shoe sizes, described below) vary by manufacturer and even from one shoe model to another. You may need a half-size or even a full size smaller or larger than you think.

Most men wear a D-width shoe while most women wear a B-width. You don't have to wear a gender-specific shoe—the lasts are basically the same. Men: Try a women's shoe if you have a narrow foot. Women: Try a men's shoe if you have a larger or wider foot. If the shoe fits, wear it!

Arch shape: Here's a simple way to find yours. As you get out of the tub, shower or pool, take a look at the footprint you leave on the bathmat or cement. The shape of your footprint will indicate the type of arch you have. Your arch shape affects the way your foot moves as you run.

Biomechanics of Running

Your foot shape is closely related to its movement as you walk or run. The typical scenario: With every stride, your heel strikes the ground first. It rolls slightly inward and the arch flattens to cushion the impact. Your foot then rolls slightly to the outside and stiffens to create a springboard to propel your next step.

As runners, however, we each experience different levels of these sideways motions as we stride. The key characteristics:

Pronation is the foot's natural inward roll following a heel strike. Basic (neutral) pronation helps absorb impact, relieving pressure on knees and joints. It is a normal trait of neutral, biomechanically efficient runners.

Overpronation is an exaggerated form of the foot's natural inward roll. It is a common trait that affects the majority of runners, leaving them at risk of knee pain and injury. Overpronators need stability or motion control shoes.

Supination (also called underpronation) is an outward rolling of the foot resulting in insufficient impact reduction at landing. Relatively few runners supinate, but those who do need shoes with plenty of cushioning and flexibility.

How can you be sure which running style is yours? A podiatrist or physical therapist could undoubtedly tell you, but a simpler answer is probably in your closet. If you own a well-used pair of running shoes, check the wear pattern on the soles.

• If you have a neutral stride, shoe wear is centralized to the ball of the foot and a small portion of the heel.
• Overpronation is identified by wear patterns along the inside edge of your shoe.
• Supination is marked by wear along the outer edge of your shoe.

Types of Running Shoes

Cushioning shoes provide elevated shock absorption and minimal medial (arch side) support. They're best for runners who are mild pronators or supinators. Cushioning shoes are also good for neutral runners during off-pavement runs. Reason: Minor irregularities in surfaces such as dirt roads give feet a little variety from the repetitive, same-spot strikes they typically experience on hard surfaces.

Stability shoes help decelerate basic pronation. They're good for neutral runners or those who exhibit mild to moderate overpronation. They often include a “post” (see Shoe Construction 101, below) in the midsole. Due to their extra support features, virtually all trail-running shoes fall in the stability category.

Motion control shoes offer features such as stiffer heels or a design built on straighter lasts to counter overpronation. They're best for runners who exhibit moderate to severe overpronation.

Here are some general guidelines:

Shoe Construction 101

Uppers

This refers to the upper part of the shoe above the sole.

• Synthetic leather is a supple, durable, abrasion-resistant material derived principally from nylon and polyester. It's lighter, quicker drying and more breathable than real leather. Plus, it requires no (or very little) break-in time and therefore reduces the chance of blisters.
• Nylon and nylon mesh are durable synthetic materials most commonly used to reduce weight and boost breathability.
• TPU (thermoplastic urethane) overlays are positioned over the breathable shoe panels (such in the arch and the heel). These small, abrasion-resisting additions help enhance stability and durability.
• Waterproof/breathable uppers (e.g., Gore-Tex XCR or eVent) use a membrane bonded to the interior of the linings. This membrane blocks moisture from entering while still allowing feet to breathe. Shoes made with these membranes keep feet dry in wet environment with a slight trade-off in breathability.

Midsole Technology

The midsole is the cushioning and stability layer between the upper and the outsole.

• Synthetic leather is a supple, durable, abrasion-resistant material derived principally from nylon and polyester. It's lighter, quicker drying and more breathable than real leather. Plus, it requires no (or very little) break-in time and therefore reduces the chance of blisters.
• EVA (ethylene vinyl acetate) is a type of foam commonly used for running-shoe midsoles. Cushioning shoes often use a single layer of EVA. Some will insert multiple densities of EVA to force a particular flex pattern.
• Posts are areas of firmer EVA (dual-density, quad-density, multi-density, compression-molded) added to create harder-to-compress sections in the midsole. Often found in stability shoes, posts are used to decelerate pronation or boost durability. Medial posts reinforce the arch side of each midsole, an area highly impacted by overpronation.
• Plates are made of thin, somewhat flexible material (often nylon or TPU) that stiffens the forefoot of the shoe. Plates, often used in trail runners, protect the bottom of your foot when the shoe impacts rocks and roots.
• Shanks stiffen the midsole and protect the heel and arch. They boost a shoe's firmness when traveling on rocky terrain. Ultralight backpackers often wear lightweight trail runners with plates for protection and shanks for protection and support.
• TPU (thermoplastic urethane) is a flexible plastic used in some midsoles as stabilization devices.

Shoe Lasts

The “last” refers both to the shape of a shoe and also the form, or mold, around which a shoe is constructed.

When referring to the shape of a shoe:

• A straight last is appropriate if you are an overpronator or have a flexible, flat arch. It helps to control inward motion.
• A curved last is designed for underpronators with rigid, high arches. The curved shape promotes inward motion.
• A semi-curved last represents the middle ground. It is appropriate for neutral pronators.

When referring to the shape of a shoe:

• Board-lasted shoes are made with a piece of stiff fiberboard glued to the upper and then to the midsole/outsole. These shoes offer the stability and motion control needed by overpronators.
• Slip-lasted shoes are made by sewing the upper into a sock which is then glued directly to the midsole/outsole without any board in-between. These are flexible and well cushioned for the supinator.
• Combination-lasted shoes feature board-lasting in the rear half for motion control and support, which slip-lasting in front for cushioning and flex. This is the most common approach and can be used a wide range of foot types.

Other Shoe Components

• Heel counter: This refers to the rigid structure around the heel. It provides motion control and is sometimes supplemented with a heel wedge, which adds support and cushioning to the heel. It can help those runners who are bothered by Achilles tendonitis.
• Medial post or torsion bar: These are located on the sides of shoes to help control excessive inward or outward motion. They are designed for the overpronator or supinator.
• Outsole: The outsole is where the rubber meets the road, so to speak. Most road shoes are made with carbon rubber—a hard, durable material—in the heel. Blown rubber—which provides more cushioning—is often used in the forefoot. Trail runners tend to have all carbon rubber outsoles to better withstand trail wear, while road racing shoes are frequently all blown rubber to reduce weight.

Fit Tips

When trying shoes on:

• Try on shoes at the end of the day. This refers to the rigid structure around the heel. It provides motion control and is sometimes supplemented with a heel wedge, which adds support and cushioning to the heel. It can help those runners who are bothered by Achilles tendonitis.
• If you wear orthotics, be sure to bring them along. They impact the fit of a shoe.
• Consider custom footbeds (insoles) such as Superfeet. Shoe manufacturers tend to provide generic insoles with their shoes since many runners use orthotics or, increasingly, custom footbeds. By using a custom footbed, you get improved cushion, stability and a better fit. These are great for people with back problems or who run long distances.

Shoe FAQs

Q: How snug should a running shoe fit?

A: You should have a thumbnail's length of extra space in the toebox. This helps you avoid losing toenails since your toes won't jam against the end when running downhill or when your feet swell. The width should be snug but allow a bit of room for your foot to move without rubbing. Laces should be snug but not tight.

Q: What is the typical lifespan of a running shoe?

A: In general, a pair of running shoes should last between 300 to 500 miles of running (3 or 4 months for regular runners). This varies depending on your running mechanics. Take a look at your shoes. While the uppers will often look good, check the midsole and outsoles to see if they are compressed or worn.

Q: If I wear an orthotic to correct my pronation, do I still need a motion-control shoe?

A: You may be OK with a neutral shoe, but a motion-control shoe offers the most additional support.

Q: Can I use a road shoe for running trails?

A: Absolutely, just keep in mind that a trail shoe will give you more traction on rough or loose surfaces than a road shoe.

Q: If I supinate, can I wear a shoe that is for overpronators?

A: You shouldn't. It's best to go with the shoe that coordinates with your body mechanics to avoid any injuries.

Q: Is it OK to do a race or long run while wearing new shoes?

A: The best approach is to do a short run first to see how your new shoes feel. You want to make sure the shoe is right for you before hitting a trail or pounding the pavement in a race.

Back to Top